Jenzi Belly Boat 170

The special features such as protective edging, carrying-strap, high-pressure flooring, or rear mount – distinguish the JENZI Belly-Boat 170 from most conventional Belly Boats on the market. Also the rod-holder, mounts for fish finder and fish finder monitor are standard included features. The 170 cm length, the extra width of 116 cm, and the diameter of 34 cm provide for a stable and secure position in the water. The five air compartments in the boat, floor, and seat, as well as the screw open valve add the needed security when angling. An added security feature is the metal stabilizer rod in which the catching straps in the middle of the seat as well as the removable net / compartment wherein a measuring tape is integrated. The Belly-Boat is consctructed from strong tear-free PVC rubber-raft material with a 0,7 mm thickness. The boat has a load capacity of 150 kg, yet with plenty of reserve to spare. Added advantages that other conventional boats do not have are the included attachable paddle as well as the special rear mount on to which an electric motor may be attached. These make it possible to move forward swiftly and with ease without the necessity of using flippers. To prevent damage to the most sensitive areas of the boat, protective edging made from thick non-abrasive material has been attached to the outside and to the underside of the boat. The Belly Boat also has adequate storage space. Both on the left and on the ride side you will find spacious pockets that are securely closeable due to Velcro and security clips, and are removable for transport. To top this off, there is an additional net hidden behind the seat as well as enough storage space for accessories and battery Accessories included: • Carry-case • Repair set • Pump • Rod-holder • Fish-finder mount • Fish-finder monitor mount • Rear mount for Electric motor • Carry-strap (for transporting the Belly Boat like a back-pack) • 2 paddles • Net / compartment (1 x in front of seat + 1 x behind seat) • 2 spacious pockets for accessories (2 x side) Features: • Length: 170 cm • Width: 116 cm • Float Diameter: 34,5 cm • Load-capacity: approx. 160 kg • Air compartments: 3+2 (3 x in boat + 1 seat compartment + 1 x floor) • Weight: approx. 18 kg • Material: PVC-material (sturdy rubber-raft material) • Material thickness: 0,7 mm • Maximum air pressure float: 0,25 bar • Maximum air pressure floor: 0,8 bar • Air valve: 5 security valves with caps • 2 large pockets ( 2 x side) Highlight: Boat may be transported as a back-pack. On the lower side of the boat are 4 metal grommets onto which the enclosed carrying-strap may be attached. This allows for the boat to be carried to the water with ease.